1050Ton 10500KN Clamping Force Plastic Injection Molding Machine

1050Ton 10500KN Clamping Force Plastic Injection Molding Machine
900Ton to 2000Ton Large Plastic Injection Molding Machine
big clamping force injection moulding machine, Injection machines from 900 Ton to 2000Ton

SPECIFICATION MZ1050
ITEM A B C D
INJECTION  UNIT
SCREW  DIAMETER mm 110 120 130 140
SCREW  L/D  RATIO L/D 24.2 22.2 20.5 19
SHOT  VOLUME（THEORETICAL） ㎤ 5037 5994 7035 8159
INJECTION  WEIGHT（PS） g 4634 5515 6472 7506
INJECTION  PRESSURE Mpa 181 152 129 111
INJECTION  RATE g/sec 750 892 1047 1214
SCREW  SPEED rpm 110
CLAMPING UNIT
CLAMP  TONNAGE KN 10500
TOGGLE  STROKE mm 1200
MIN.MOLD  HEIGHT mm 440
MAX.MOLD  HEIGHT mm 1150
SPACE  BETWEEN  TIE  BARS mm 1160X1160
EJECTOR  TONNAGE KN 240
EJECTOR  STROKE mm 340
EJECTOR  NUMBER PC 21
OTHERS
MAX.PUMP  PRESSURE  Mpa 16
HEATER  POWER KW 71.35
PUMP MOTOR  POWER KW 33+33+20
OIL  TANK CUBAGE L 2000
MACHINE  DIMENSION（LxWxH) M 12X2.58X3.7
MACHINE  WEIGHT T 55

OUR IMM Advantages (Clamping Unit):
Five-point box-type mold platen design, strong and reliable.
Up-grade Tie-bar material and processing technology, with high frequency induction hardening processing technology, working life much longer.
Toggle pin adopt 42CrMo material, and different section adopts different heating processing technology, ensure the best durability.
High quality copper bushes on tie bars guiding parts, working life long.
Push platen adopts the graphite-cooper bushes, long life, high speed & precision.
Thicken central of platen, effective for mold and machine life and product precision.
Enhanced strength for fixed platen, improve products stability and quality.
Gear type mold height adjustment, easy and precise.
800T and above machine, the moveable platen support feet adopt hydraulic support device, ensure perfect mold open and close stability, and extend mold using life.
OUR IMM Advantages (Injection Unit):
Full supported injection unit structure, avoid it up and down under high pressure injection, ensure high precise injection.
Imported high quality SKD61 material screw tip, check ring and thrust ring; a lot kinds of screws design can meet different plastic material and special processing injection molding necessary.
Injection guiding bushes adopt graphite-cooper material; ensure high repeatability precision and long life.
Centralized lubrication for injection unit, easy for machine maintenance.
Barrel PID controls the difference of temperature, less error.
Dual carriage cylinders ensure the best injection precision, and avoid injection unit move right and left.
For big machine (600T and above size), adopts the barrel support device, avoid barrel up and down, ensure no material leaking under high pressure injection.