10/100M Single Fiber Media Converter

ANYK Series 10/100M Singlemode Single Fiber Converter is the conversion equipment of Ethernet optical-electronic signals between 10/100M UTP interface (TX) and 100M Fiber interface (FX). The traditional 10/100M Fast Ethernet can be extended to the distance of 90km through Single Optical Fiber link. The performance and quality of the products are excellent because of adopting latest IC from Taiwan. It must be used in couples¡«because the transmitted optical differs from the receive optical in wavelength. 6 Group LED indicated lights could fully monitor the working conditions of Converters. It is easy for end-users to observe the conditions of network. The Series product with reasonable price is especially designed for network end-users.
Main features

ÿ?Auto negotiation function allows UTP port to auto select 10M or 100M, and Full Duplex or Half Duplex;
ÿ?UTP port supports MDI/MDI-X auto crossover;
ÿ?Support link fault pass through function(LFP)¡«with indicator function of link fault: When optical fiber or UTP is at fault, the converter could stop all the link;
ÿ?Support far end fault function;
ÿ?Multiple Optical Transceiver could be chosen: SC, ST or FC, singlemode / multimode;
ÿ?Supporting 1600 bytes packet for management;
ÿ?Converter working mode could be chosen: Store and forward switch mode, Modified cut-through switch mode, or Converter mode;
ÿ?Internal Circuit of prevented thunder could greatly reduce damage of the converter caused by thunderbolt induction;
ÿ?Internal or External switching power: for users to choose.
Technical Specifications
ÿóOperating standard: IEEE802.3u, 10/100Base-TX and 100Base-FX
ÿóBuilt in 128Kb RAM for data buffer;
ÿóConnector: UTP: RJ-45,10/100Mbps; Fiber: SC,100Mbps
ÿóCable:
UTP: Cat. 5 UTP (the max distance up to100m)
Fiber ( Singlemode): 8.3/125, 8.7/125, 9/125, 10/125¥Ìm¡§the max distance up to 90km¡¨
ÿóFlow control
Full Duplex¡ºIEEE802.3x
Half Duplex¡ºback pressure
ÿóLED: Power, FX Link/Act, FX SD(Signal Detect), TX 100, TX Link/Act, TX FDX.
ÿóPower : AC 220V(170-250V)¡«50Hz; DC: 5V¡«1A
ÿóAmbient temperature¡º0 ÿ?+50ÿ?
ÿóStorage temperature¡º-20 ÿ?+70ÿ?
ÿóHumidity¡º5% ÿ?90%
ÿóDimensions¡º
Power external: 26 (high) x 70 (width) x 94 (length) mm
Power internal type: 30 (high) x 110 (width) x 140 (length) mm