10/100/1000M Fiber Media Converters

ANYK Series Gigabit Fiber Media Converter can convert Optical¡¬Electric Ethernet signals between 10/100/1000M UTP interface (TX) and 1000M optical fiber interface (FX). The traditional 10/100/1000M gigabit Ethernet can be extended to the distance of 100km through optical fiber link. The performance and quality of the products are excellent because of adopting latest Gigabit IC from USA and Taiwan. 6 Group LED indicated lights could fully monitor the working conditions of converters. It is easy for users to observe and diagnose the failure of converters. ANYK Series Gigabit Converters could be used alone; but Converter Card should be inserted to 16 slots RACK supplied by DaShi Crop. which is suitable for the use of Network Centre.

Main features

ÿóAuto negotiation function allows UTP ports to auto select 10/100/1000M and Full Duplex or Half Duplex.
ÿóThe UTP port supports the connection of MDI/MDI-X auto crossover.
ÿóMultimode Fiber: the max distance up to 224m/ 550m
Singlemode Fiber: the max distance up to 100km
ÿóSupporting the max 1536 byte Ethernet packet
ÿóSupporting flow control
ÿóAdopting internal power supply

Technical Specifications

ÿóOperating standards: IEEE802.3z/AB, 1000Base-T and 1000Base-SX/LX
ÿóMAC address table: 4K
ÿóData Buffer: 256K
ÿóConnector: UTP: RJ-45,10/100/1000Mbps; Fiber: SC,1000Mbps
ÿóCable :
UTP cable: Cat 5e or Cat 6 (the max distance up to 100m)
Fiber : multimode : 50/125, 62.5/125¥Ìm (the max distance up to 550/224m)
singlemode : 8.3/125, 8.7/125, 9/125¥Ìm (the max distance up to 100km)
ÿóFlow control
Full Duplex: IEEE802.3x
Half Duplex: back pressure.
ÿóPower: AC 220V(170-260V) 50Hz; DC 5V¡«2A
ÿóAmbient temperature¡º0 ÿ?+50ÿ?
ÿóStorage temperature¡º-20 ÿ?+70ÿ?
ÿóHumidity¡º5% ÿ?90%
ÿóDimensions¡º40 (high) x 110 (width) x 140 (length) mm