Global Trade Hub QUICK FIND
trade hub
freight cargo shipping directory
trade shows and exhibitions
Advertisements
 1 ton stopper bottom injection type intermediate frequency holding furnace
scroll left
  • 1 Ton Stopper Bottom Injection Type
scroll right

1 ton stopper bottom injection type intermediate frequency holding furnace

Price: US$ 1
Minimum Order:
Payment Terms: 西联汇款
Port of Export:
Skype Me
Product Details
Model No.: Brand Name:
Certification:
Specification: title:
1 ton stopper bottom injection type intermediate frequency holding furnace
1 ton plug rod medium frequency holding furnace.cast tube special equipment
I. Overview:
1, equipment type:
The 1 ton stopper bottom injection type intermediate frequency holding furnace
is mainly used steel (iron) and raised temperature water insulation, steel (iron) melting water from other devices (such as blast furnace, converter, cupola), and poured into an induction furnace insulation, and then fine-tuning components, and provide appropriate Warm to the final casting temperature.
Second , the main technical parameters of the equipment
A, comprehensive parameters
Serial number project Parameter requirement
   1 Equipment form 250kw
2 Rated Capacity 1T
3 Maximum capacity 1T +30%
4 Operating temperature 1450 ®C cast iron insulation
5 Working noise <85 decibels
6 Furnace structure Steel shell
7 Way out Side outlet
B, electrical parameters:
Serial number project parameter
1 Power supply 250kw / 3 phase 6 pulse 1T
2 Number of rectifiers 6 veins
3 Inverter SCR parallel inverter
4 Rated frequency 1000 Hz
5 Line voltage 380V
6 DC voltage 500V
7     IF voltage 750 V
8 Start success rate 100%
9 Power factor 0.92
C, with cooling system parameters
Serial number project parameter
1 Closed loop cooling tower ZXZ-N 80 T ( 20/60) integrated layered tower
2 Cooling tower housing Galvanized or 304 stainless steel
3 Fan supporting motor 1.1KW
4 Spray pump 2.2 KW
5 Main circulation pump 7.5kw
6 Cooler 304 cooler
D , furnace index
Serial number project parameter
1 Furnace shell structure Steel structure
2 Yoke material Z11-0. 23
3 Yoke coverage 8 5%
4 Yoke clamping Stainless steel 1Cr18Ni9
5 Yoke cooling method Double water cooling
6 Sensor copper tube material T2 pure copper 99.9
Induction ring inner diameter 900 wall thickness 5 mm
Induction loop height 500 mm
7 waterway 4 in 4 out
8 Way out Side out
9 Water cooling ring material Copper tube
10 Furnace shell heat <75 ® C (except the furnace bottom and the furnace cover)
11 insulation The coil and the yoke are insulated by a double layer of mica board.
12 bolt Ordinary carbon steel bolts are grade 8.8. Other bolts made of stainless steel or copper
13 Die thickness >5mm
14 Water connection hose Use non-flame retardant high insulation rubber tube
15 Water collector Stainless steel
Fifth , the furnace structure description:
5.1 mechanical principles described structure
The furnace body adopts a steel shell yoke furnace body, and the outlet channel "gate" of the metal melt is arranged at the bottom of the electric furnace. ( High-aluminum graphite or zirconia nozzle ) Since the metal is in the smelting process, impurities and slag float on the liquid surface; the bottom-injection casting can prevent impurities and slag from entering the casting cavity, greatly reducing the occurrence of waste. The steel water outlet is connected with a plug rod action mechanism; the plug rod action mechanism comprises a plug rod, a cylinder and a transmission lever, the bottom shape of the plug rod is adapted to the shape of the molten steel outlet, and the bottom of the plug rod is tapered from top to bottom; the cylinder drive transmission The lever rotates along a fixed axis, and the transmission lever drives the plug to raise or lower. Use the rising or falling movement of the plug rod action mechanism to control the opening, closing or opening of the taphole, and precisely control the tapping point and tapping flow rate and the tapping flow rate.

The plug rod action mechanism comprises a stopper rod 2, a cylinder 3 and a transmission lever 4, the cylinder 3 is connected to one end of the transmission lever 4, and the bottom of the cylinder is fixed ; the stopper rod 2 isconnected to the other end of the transmission lever 4, the bottom shape of the stopper rod 2 and the molten steel outlet The shape is adapted, and the bottom of the stopper rod 2 is tapered from top to bottom; the cylinder 3 drives the transmission lever 4 to rotate along a fixed axis, and the transmission lever 4 drives the stopper rod 2 to ascend or descend. It is characterized in that the steel water outlet has a circular cross section, and the bottom of the stopper rod 2 has a circular cone shape. The other end of the transmission lever 4 is fixedly connected with a suspension sleeve 5 for suspending the stopper rod 2 from the transmission lever 4. The stopper action mechanism further includes a rotary bearing 6 that connects between the suspension sleeve 5 and the stopper rod 2. The plug action mechanism further includes a bracket 7 to which the sleeve type adjuster (8) is fixedly coupled; a buffer spring 10 and a position fixing rod 9 are further fixed, and the lower end of the suspension sleeve 5 is fixed to the upper end of the buffer spring 10 The lower end of the buffer spring (10) is fixed to the inner ring of the rotary bearing (6), and the outer ring of the rotary bearing 6 is connected to the position fixing rod
*/BdwlkjProduct.asp?id=352
Packaging & Delivery
Packaging:
Delivery/Lead Time:
Production Capacity:
Product Description
title:
1 ton stopper bottom injection type intermediate frequency holding furnace
1 ton plug rod medium frequency holding furnace.cast tube special equipment
I. Overview:
1, equipment type:
The 1 ton stopper bottom injection type intermediate frequency holding furnace
is mainly used steel (iron) and raised temperature water insulation, steel (iron) melting water from other devices (such as blast furnace, converter, cupola), and poured into an induction furnace insulation, and then fine-tuning components, and provide appropriate Warm to the final casting temperature.
Second , the main technical parameters of the equipment
A, comprehensive parameters
Serial number project Parameter requirement
   1 Equipment form 250kw
2 Rated Capacity 1T
3 Maximum capacity 1T +30%
4 Operating temperature 1450 ®C cast iron insulation
5 Working noise <85 decibels
6 Furnace structure Steel shell
7 Way out Side outlet
B, electrical parameters:
Serial number project parameter
1 Power supply 250kw / 3 phase 6 pulse 1T
2 Number of rectifiers 6 veins
3 Inverter SCR parallel inverter
4 Rated frequency 1000 Hz
5 Line voltage 380V
6 DC voltage 500V
7     IF voltage 750 V
8 Start success rate 100%
9 Power factor 0.92
C, with cooling system parameters
Serial number project parameter
1 Closed loop cooling tower ZXZ-N 80 T ( 20/60) integrated layered tower
2 Cooling tower housing Galvanized or 304 stainless steel
3 Fan supporting motor 1.1KW
4 Spray pump 2.2 KW
5 Main circulation pump 7.5kw
6 Cooler 304 cooler
D , furnace index
Serial number project parameter
1 Furnace shell structure Steel structure
2 Yoke material Z11-0. 23
3 Yoke coverage 8 5%
4 Yoke clamping Stainless steel 1Cr18Ni9
5 Yoke cooling method Double water cooling
6 Sensor copper tube material T2 pure copper 99.9
Induction ring inner diameter 900 wall thickness 5 mm
Induction loop height 500 mm
7 waterway 4 in 4 out
8 Way out Side out
9 Water cooling ring material Copper tube
10 Furnace shell heat <75 ® C (except the furnace bottom and the furnace cover)
11 insulation The coil and the yoke are insulated by a double layer of mica board.
12 bolt Ordinary carbon steel bolts are grade 8.8. Other bolts made of stainless steel or copper
13 Die thickness >5mm
14 Water connection hose Use non-flame retardant high insulation rubber tube
15 Water collector Stainless steel
Fifth , the furnace structure description:
5.1 mechanical principles described structure
The furnace body adopts a steel shell yoke furnace body, and the outlet channel "gate" of the metal melt is arranged at the bottom of the electric furnace. ( High-aluminum graphite or zirconia nozzle ) Since the metal is in the smelting process, impurities and slag float on the liquid surface; the bottom-injection casting can prevent impurities and slag from entering the casting cavity, greatly reducing the occurrence of waste. The steel water outlet is connected with a plug rod action mechanism; the plug rod action mechanism comprises a plug rod, a cylinder and a transmission lever, the bottom shape of the plug rod is adapted to the shape of the molten steel outlet, and the bottom of the plug rod is tapered from top to bottom; the cylinder drive transmission The lever rotates along a fixed axis, and the transmission lever drives the plug to raise or lower. Use the rising or falling movement of the plug rod action mechanism to control the opening, closing or opening of the taphole, and precisely control the tapping point and tapping flow rate and the tapping flow rate.

The plug rod action mechanism comprises a stopper rod 2, a cylinder 3 and a transmission lever 4, the cylinder 3 is connected to one end of the transmission lever 4, and the bottom of the cylinder is fixed ; the stopper rod 2 isconnected to the other end of the transmission lever 4, the bottom shape of the stopper rod 2 and the molten steel outlet The shape is adapted, and the bottom of the stopper rod 2 is tapered from top to bottom; the cylinder 3 drives the transmission lever 4 to rotate along a fixed axis, and the transmission lever 4 drives the stopper rod 2 to ascend or descend. It is characterized in that the steel water outlet has a circular cross section, and the bottom of the stopper rod 2 has a circular cone shape. The other end of the transmission lever 4 is fixedly connected with a suspension sleeve 5 for suspending the stopper rod 2 from the transmission lever 4. The stopper action mechanism further includes a rotary bearing 6 that connects between the suspension sleeve 5 and the stopper rod 2. The plug action mechanism further includes a bracket 7 to which the sleeve type adjuster (8) is fixedly coupled; a buffer spring 10 and a position fixing rod 9 are further fixed, and the lower end of the suspension sleeve 5 is fixed to the upper end of the buffer spring 10 The lower end of the buffer spring (10) is fixed to the inner ring of the rotary bearing (6), and the outer ring of the rotary bearing 6 is connected to the position fixing rod
*/BdwlkjProduct.asp?id=352
 1 ton stopper bottom injection type intermediate frequency holding furnace
Skype Me

SUPPLIER PROFILE
Company: Luoyang Songdao induction heating technology Co., Ltd.
City/State luoyang, henan Country: China  
Business Type: Export - Manufacturer / Trading Company Established: 2016
Member Since: 2018 Contact Person alisa zhao
SUPPLIER PROFILE
City/State/Country -
luoyang, henan
China  
Business Type -
Export - Manufacturer / Trading Company
Established -
2016
Member Since -
2018
Contact Person -
alisa zhao