We are a leading Chinese manufacturer of graphic arts and printing supplies with long history, rich experience and established technology. Our products include positive and negative offset printing plate (conventional PS plate), compressible rubber printing blanket, HN type image setter film, printing chemicals, and other printing consumable items. We also manufacture the PS plate production system by ourselves.

Being the leading products, our offset printing plate, compressible rubber blanket and HN film are already distributed in many countries in the Far East, Middle East, southern Asia, North and South America, many area in Europe, southern and northern Africa, etc..

The following is some info about our products. You can ignore and skip any part if you are not interested in.

Please send us inquiry directly at our email or numbers, 86 10 6568 7388

Offset Printing Plate
==================

Also named as Pre-sensitized Plate, P S plate, lithographic plate, or aluminum printing plate, etc., and used on offset printing machines and a must for most of the offset printers nowadays.

- Work: positive
- Base: aluminum
- Production: by continuous feed-in lines of aluminum rolls, with electrolytic graining and anodizing.
- Standard thickness: 0.15mm, 0.25mm and 0.28mm (other none-standard thickness requires longer delivery time).
- Standard sizes readily available for Heidelberg, Roland, Solnar, Ryobi, Multilith , Gestetner, Man, Hamada, etc., and also can be cut into any sizes required by any customers and printing machines.
- Punching holes on the gripper side accepted in standard perforation style, such as pb-1, pb-2 or SL for many machines from Multilith and Ryobi to Brazilian CATU.
- Conforms to ISO 12635: 1996 or its equivalent version of Standard of China GB/T 17155-1997.
- Color of coating: green, turns to blue if exposed.
- Dots reproduction: at least 2% - 98%
- Exposure time: 50-60 seconds under 3,000W Iodine Gallium light at the distance of one meter.
- Development time: 20-30 seconds
- Print runs: above 100,000 impressions (may change accoriding to printing ink, paper and other factors)
- Negative printing plate also available on order basis.
- Accept producing the offset printing plates by the aluminum coil or sheets provided by the buyers and charge for the production only.
-Also re-generate (re-cycle) the used plates provided by the buyers.

Rubber Blanket
==============


- For Offset Printing

We supply both compressible and conventional rubber blanket for offset printing, in roll or in cut pieces as per sizes required by customers. Our compressible rubber blanket features:

-Compressible Layer 4-ply for 1.95mm or 3-ply for 1.68mm
-Shore Hardness 78 /- 1
-Elongation <2% / 1,000N
-Elongation at Break <5%
-Elongation Intensity >4,000N
-Max. Printing Speed 15,000 runs per hour for 4-ply35,000 runs per hour for 3-ply
-Max. Width 1440 mm
-Standard Length per Roll 25 meters

Our blanket has been widely distributed in the USA and Europe market under customer's private label.

Blanket for special printing also available, such as UV blanket.

- For Gravure Printing

One of our gravure printing blanket is the special type of blanket for printing of banknote or similar securities. Our customers include the official printer of Renminbi, the Chinese currency. This blanket features the following:

Color black
Thickness 0.50 /- 0.02mm & 0.80 /- 0.02mm
Elogation <= 13%
Elogation at break >=28 MPA (for 0.50mm)


Graphic Arts Film
================

The red laser (HN type) imagesetter graphic arts film features high sensitivity, wide developing latitude, short fixing and drying time and good dot reproduction, and is suitable for many brands of laser imagesetter or phototypesetters with light source at 632.80 - 670mm.

-Widely used width: 356, 406, 508, 558, 762, 1079, etc., and any others at customers requirement
-Length: 60 Meters or 61 Meters per roll
-Package: room light film feeder, soft flange package or hard flange package
-Rolling direction: emulsion layer side inward or outward
-Axis diameter: 28.6 - 71.9mm

Some typical examples of the imagesetters that our film woks with:

Brand Model Light Source
AGFA Selectset Avantra 650
Heidelberg Signasetter Pro 632.8
Heidelberg Herkules Pro 670
Heidelberg Ultre 5800 670
Panther Panther Pro 46 670
Scitex Dolev 450 632.8
Screen FT-R-3050 633
Screen FT-R-3055 635


Printing Chemicals
================

Our printing plate has wide developing latitude and is developed and designed to work perfectly with most of the chemicals generally available nowadays in the market, however, we produce and supply related chemicals by ourselves to meet customers' demand. They include:

Chemicals Capacity / Bottle
Developing Powder 500 gram
Image Remover 100 gram
Protection Gum 2 liter
Fountain Solution 1 liter
Baking Solution 1 liter
Ink Cleaner 1 liter
Plate Cleaner 500 ml
Photosensitizing Coating Solution 10 liter


Plate-Making Lamp
===============

This is the instant start Metal Halide Lamp, named Gallium Iodide Lamp, for the purpose of lithographic printing plate exposure in the pressroom. Suitable in most printing-down machine for plate making. Various power, voltage and wattage available, with 1KW, 3KW and 5KW as the leading selling item.

Production Line for the Production of Offset Printing Plate
============================================

Based on our experience since 1970s in the sector of plate production, we provide full technology and know-how for the designing, building, installation, operation and maintenance of printing plate production lines, by means of consultancy, equipment supplies, expertise and service supplies, and turn-key project. Two types of lines are available from our side:

a) Continuous Coil Line

This is the kind of line we are running to produce the plates we are selling. Features material feeding of aluminum coil in rolls, automatic operation, continuous production, and higher speed for production with stable plate quality. Produces positive and negative plates with gauge ranges whatever available with the aluminum suppliers including thickness like 0.13mm or 0.15mm.

Production Procedure:
De-coiling --> electrolytic --> anodize --> coating --> drying --> checking --> packing

b) Single Sheet Line

This is for the production of new offset printing plate with the single sheet aluminum as the material; and/or the re-generating of the used offset printing plates so that they can be used for another time(s). Features low cost but quick return of investment, economic operation, stable line speed, and also save the resources when re-generating used plates. Aluminum material supply has to be pre-cut into right single pieces, and smaller gauges like 0.15mm thickness can not be produced.

Production Procedure:
ink removal --> degrease --> correction --> electrolytic --> anodize --> coating --> drying --> checking --> packing