RS232 RS485 to WiFi and Ethernet converter

Introduction of Serial WIFI Converter
USR-WIFI232-610-V2 is a wireless serial WIFI converter, which is used for project of RS232/RS485 serial equipment to WIFI or Ethernet networking. It can be controlled by mobile phone or laptops, also can be connected to the remote server.

Features of Serial WIFI Converter
Hardware flow control (RTS/CTS) RS232 interface, male mouth(needle) consistent with computer pin definition
DC5~18V wide voltage input, can provide 2A current MP1482DS DCDC power supply chip, keep system reliability.
RS232 RS485 automatic switching
RJ45 network connection, support wired Ethernet transmission
Reload button, do not worry incorrect settings (in working status, press the button 3-5s then it load to default settings and automatic restart)
Rich status indicator light: Power Ready Link RXD TXD
Support IEEE802.11b/g/n wireless standards
Support TCP/IP/UDP network protocols
Support RS232 RS384 data interface
Support work as STA/AP/AP+STA mode
Support router/bridge Mode networking
Support external antenna
Support transparent transmission mode
Support AT+ instruction set for configuration
Support friendly web configuration page
Support palmodic signal
Single 5-18V power supply
Small size: 84 x 84x25mm
FCC/CE/RoHS/TELEC certificated
Function comparison of Serial WIFI Converter
Wireless Device Servers

Application Field of Serial WIFI Converter
Serial RS232/RS485 to Wifi or Ethernet
WiFi remote control and monitoring, TCP/IP and WiFi coprocessor
WiFi remote control toy such as aircraft and cars
WiFi Internet radio, camera, digital photo frame
Medical instrument, data acquisition, handheld device
WiFi fatness testing machine, smart card terminal, Smart Home
Instrument, equipment parameter monitoring, wireless POS machine
Modern agriculture, military field and other wireless related secondary development applications
Application of Serial WIFI converter
1.Application of AP

application of AP mode

2.Application of STA

application of STA mode

3.Application of AP+STA

application of AP STA

4.Wired and Wireless Application

Wired Wireless only for 610

Wired Wireless only for 610-STA

5.Application of one AP and one STA

ONE ap one sta mode

Simple Transparent transmission
Transparent transmission means that whatever is transferred, our device plays the role of a channel and sends data to the target without modification. On-site monitoring equipment sends data to Wireless Device Servers transparent data transmission terminal by itself port, the terminal CUP receives data by serial port and package data.

Various parameter setting method
Software Settings
Download settings software, search Wireless Device Servers in the LAN through the serial port server IP, name, MAC address, or the version number. Then set the parameters you need, otherwise keep the default.
Web-page Settings

Open your browser and inter the default IP address of the Wireless Device Servers.
Open the login page of Serial Server, Enter the user name and password (default admin).
After setting parameter, Click “Save“ and “Restart“, then setting will take effect.
Serial AT commands Settings
User can set parameter by module itself without going through another computer to configure. This setting method is used in the following situation: user have to configure IP address and destination IP address on site. AT command can meet the demand. After MCU connects serial server module by TTL (UART), MCU can configure setting by AT command.