Cooling Tower Motor For Baldor

Zhejiang Aoshuai Refrigeration Co., Ltd. is a professional cooling tower company that supplies FRP cooling tower and cooling tower spare parts. Industrial cooling towers llc is located in Dongguan Industrial Zone, the base of cooling tower production for 40 years in China. Our cooling tower factory covers an area of 9000 square meters.

Installation Of Cooling Tower Motor For Baldor
a. After unpacking the baldor cooling tower motor, check whether the accessories and documents are complete, and carefully check whether the motor nameplate data meet the requirements.

b. Whether all parts of the cooling tower motor are in good condition, whether the fasteners are loose, and the motor shaft should be flexible when rotating by hand.

c. Use a 500V megohmmeter to measure the insulation resistance between the motor stator winding and the shell. The resistance value should not be less than 0.5 megohm, otherwise the winding should be dried. The maximum temperature during drying shall not exceed 120 ℃ .

d. After the fan or pulley is installed on the motor shaft extension, tighten the nut or bolt on the shaft extension end to prevent loosening.

e. The motor should be grounded correctly. There is a grounding device in the upper left corner of the junction box, which should be reliably grounded through wires.